How to make Rechargeable Remote

DTH Tricks World — Fri, 17 Oct 2025 09:10:35 +0000

Hi Friends, If you are tired of changing the cell in your DTH or TV remote again and again. Then today we will tell you the easiest way to make your DTH or TV remote a RECHARGEABLE REMOTE.

To make a remote rechargeable, You’ll need sone component like
1. IN4007 DIODE
2. TP 4056 Charging Module with Type-C Port
3. 3.7 V Lithium Bettery 800 mAh and some small wires.

After that, Carefully open the remote’s casing. Use a paper cutter or knife to carefully carve out space inside the battery compartment to fit the new rechargeable battery and the charging circuit board.
Solder the positive (+) and negative (-) wires from the charging circuit to the original battery contacts inside the remote. In positive wire from charging circuit to remote, connect IN4007 DIODE. Connect the rechargeable battery’s positive and negative terminals to the corresponding points on the charging circuit board.
Cut a small hole in the remote’s casing, usually on the side or bottom, to allow the charging port (e.g., micro USB) to be accessible. Mount the charging module so the port is flush with the hole. Secure it with a hot glue gun or fevikwik.

Before closing, use a phone charger to plug into the micro USB port to ensure the charging indicator light comes on. Once you confirm it works, reassemble the remote, ensuring all parts are correctly aligned before snapping the casing back together.

Now your remote is Rechargeable Remote, you don’t need to put AAA or AA Battery inside the remote. If remote’s battery discharge, you can easily Recharge battery with Type-C Port.

The post How to make Rechargeable Remote appeared first on DTH TRICKS WORLD.

How to remove Dual Boot Menu in Windows

DTH Tricks World — Fri, 27 Jan 2023 03:26:21 +0000

Hi Friends, If you have installed new windows in your Laptop or Computer. Now If your Laptop or Computer show a Dual Boot Menu in Windows Boot Manager on starting Laptop or Computer, then in this article you learn how to remove the Dual Boot Menu in the following Windows versions: XP, Vista, 7, 8, 8.1 and 10. Sometimes you do not uninstall the old Windows in our Laptop or Computer and install new Windows. or sometimes If some files of old Windows remain if older Windows not uninstalled properly. Then there is a problem of Dual Boot Menu in Windows Boot Manager in your Laptop or Computer.

To remove Dual Boot Menu, first you have to start your Laptop or Computer. Then press CTR+R, then type msconfig and press OK. Now System Configuration will open, then click on Second Option BOOT. Now two windows will appear here. From here you can choose Default OS by selecting any Windows according to you and you can delete the old Windows by selecting it. After this click on apply and click on OK and after that restart the laptop or computer. We have given video below, you can see full process in this video.

I hope this article helps you and solve Dual Boot Menu problem.

The post How to remove Dual Boot Menu in Windows appeared first on DTH TRICKS WORLD.

Laptop or PC Tricks Archives - DTH TRICKS WORLD

How to make Rechargeable Remote

How to remove Dual Boot Menu in Windows